User's Manual

R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 37 (98)
1. If the R60 station is used standalone (without redundancy) then the BSC
Configuration shall be selected to be Stand Alone.
If the base station is used in a hot-standby (redundancy) configuration, then
the BSC Configuration shall be selected to be either Dual BSC A or Dual BSC,
and Preferred Status shall be Master or Hot Standby. Further information can
be found in section 6.13.
2. If changes are made to any of the redundancy settings, make sure to click on
the Save Changes button before leaving the Hot Standby sub-category page.
3. The setup is complete. If the VHF antenna was unplugged in the beginning of
the setup procedure, it can now be reconnected.