User's Manual

R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 74 (98)
Group
Parameter
Description
All other parameters on this page are unique for the selected area
index.
Area Filter
Defines the geographical region of for the area filter.
Filter
Disabled – The selected area index is not used at all.
Include – All vessel reports within the defined area, that fulfil (all)
the defined criteria, will be repeated.
Exclude – The filter will exclude a defined area; any vessel reports
from within an exclude area are stopped from being repeated.
Settings other than the coordinates are not used.
Latitude NE
Longitude NE
Latitude SW
Longitude SW
The repeater area is a square-shaped area defined geographically
by its North-East (NE) and South-West (SW) corners.
The coordinates format is:
degrees
N/S/E/W
minutes
.
fractions of minutes
Example: Latitude = 16N12.9823, meaning 16° North and 12.9823'
Repeat
Indicator
Max
Defines the maximal repeat indicator a received message can have. If
the repeat indicator exceeds this maximum value the message is not
repeated.
Increment
The repeater will increment the repeat indicator in the message
before re-broadcasting it. This parameter defines how the repeat
indicator is incremented. Either it is increased by 1, or set to 1, 2 or 3
(regardless of previous value). If this does not result in an increase
the message will not be repeated.
Speed Filter
Min SOG
[knots]
All message from vessels with a SOG less than this parameter are not
repeated. Set to zero to disable this filter.
Stationary
Check this to stop all messages from vessels that are stationary from
being repeated. Stationary is defined as at anchor or moored in
addition to SOG ≤3 knots for Class A, and SOG ≤2 knots for Class B.
Course Filter
Filter
Selects how the course filter should work. The COG of the vessel is
compared to the First and Last parameters below.
Disabled – No check of COG is done.
Include – No repeat is done unless COG is between First and Last.
Exclude – No repeat is done if COG is between First and Last.
First
Beginning of sector checked (degrees north).
Last
End of sector checked (degrees north).
Nav Status
Filter
Enable
Enables or disables the navigational status filter feature.
<selections>
Tick the appropriate box to select navigational status filtering.
Messages from vessels with a navigational status not ticked will not
be repeated.
Message
Filter
Enable
Enables or disables the message number filter feature.
<selections>
Tick in the appropriate box to specify which AIS messages will be
repeated. For definitions of message numbering, see Ref [2].