Use and Care Guide

with appropriate overcurrent protection. Please refer to the electrical

requirement on the nameplate. Please make sure that your unit has its own

dedicated outlet. Do not use an extension cord.

SAFETY / WARNING

Please pay close attention to the safety notices in this section.

Disregarding these notices may lead to serious injury and/or damage to

the unit.

ATTENTION

■ To minimize shock and fire hazards, be sure not to overload outlet. Please

designate one outlet for your unit.

■ Do not use extension cords.

■ Do not put your hands under the unit when the units is required to be

moved.

■ When the unit is not in use for a long period o time, please unplug the unit

from the outlet.

■ After unplugging the unit, wait at least 10 minutes before re-plugging it.

Failure to do so could cause damage to the compressor.

UNPLUG CORD

■ To minimize shock and fire hazards, please do not plug or unplug the cord

with wet hands.

■ During maintenance and cleaning, please unplug the unit.

PROPER GROUDING REQUIRED

■ To minimize shock and fire hazards, make sure that the unit is properly

grounded.

PROHIBITION

■ Do not attempt to remove or repair any component unless instructed by

factory.

■ Make sure that the unit is not resting on or against the electrical cord and

plug.