Operating instructions

10
Sabine SWM4000 Smart Spectrum
®
Wireless
© 2010 Sabine, Inc.
Allows manual selection of a frequency group. Pressing SET increases the group number by one. When the correct
frequency is displayed press S.O. (SYNC). For best results when operating multiple systems, set all systems to a single
group; then set each system to a unique channel within that group.
Allows manual selection of a frequency channel. Pressing SET increases the channel number by one. When the
correct frequency is displayed press S.O. (SYNC).
Display the current frequency in MHz. Press again to display group and channel.
Hold down the SET key and press MENU to lock or unlock the receiver. Locking prevent the current receiver settings
from changing.
Indicates RF activity. Only one antenna is active at any one time.
Indicates a low transmitter battery charge.
The INCOMPATIBLE warning indicates that the receiver and transmitter are set to incompatible frequency bands.
Contact your retailer for assistance.
Appendix A
Manual Programming
R7
R8
R9
R5
R23
R21
R26
SW40-RM
VOL
A
B
ANT
S.Q.
I.R.
RF
AF
MENU
SYNC
SET
TRUE DIVERSITY
RECEIVER
UHF
GROUPCHANNEL
02 04
Volume (Gain)
Squelch
RF signal
Active antenna
I.R. sensor
Group selection
Menu
Sync
Audio signal
Lock all controls
Set
Channel number
SW40-RF Module Front
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R2
R3
R5 R6
R4
R9
R7 R8
R11 R13
R10 R12
INCOMPATIBLE
Antenna status
Group selection
Manual channel selection
Lock/unlock receiver settings
Transmitter Battery status
Automatic frequency selection
Display frequency
Incompatable frequency
SW40-RH LCD display
R5
R5
R7
R8
R9
R23
R21
R22
R24
R9
R8
R7
R24
R21
R22 R23
Any option displayed on screen will generally time out after ve seconds
*
Available only on the SW40-RH
*