Operating instructions

ManualsBrandsSABINE ManualsAntennaSWASS-EXT-2

Sabine SWM4000 Smart Spectrum

Wireless

Select Button

Up Button

Down Button

Programmable Control of External Switch

Infrared Port

Transmitter LCD Screen

External Switch

Transmitter controls and battery compartments

Handheld Transmitter Controls

To Close: Turn the housing and push up until it

meets the threads, then screw on.

To Open: Unscrew lower portion of microphone.

Pull down as you continue to turn the housing.

Programming the Handheld Transmitter

Group/Channel: Press the Select button to enter Edit Mode, and repeat until the

GROUP indicator ashes. In this mode, the Up/Down buttons will adjust Group selec-

tion. Choose your group, then press the select button until the CHANNEL indicator

ashes. In this mode, the Up/Down buttons will adjust Transmission Channel.

RF Output: Press the Select button to enter Edit Mode, and repeat until the antenna

indicators ashes. The small antenna symbol indicates low output (useful if there are

many transmitters clustered together) and the large antenna symbol indicates high

output (good for larger spaces). Press the up or down buttons to add or subtract the

high-level output symbol.

Internal Control of External Switch: The recessed transmitter controls include a

3-position switch, which in turn determines how the transmitter’s external two-position

switch behaves. From left-to-right, the 3 positions of the internal switch correspond

to the following external switch operations. NOTE: The antenna symbol blinks when

the transmitter is not muted.

- ON-OFF: In the off position the transmitter is turned off. When you turn it on

there is a short boot-up period before the mic turns on.

- ON-MUTE: In the off position the audio is muted, but the transmitter is still

on. Use this when you need the audio to come on instantly when turning on the

microphone.

- ON-ON: In both switch positions the mic is on. In essence you are disabling

the external switch, and leaving the mic on at all times. This is useful if you are

working with talent that might accidentally turn off the mic.

Battery Life Indicator: The battery symbol shows the battery level. Typical battery

life is 8 hours.

Transmitter Controls

Transmitter LCD screen

Group Number

Channel Number

Antenna Indicator - Low output

Antenna Indicator - High output

Battery life Indicator

DTM2

SCALE 1.000