Operating instructions

Sabine SWM4000 Smart Spectrum

Wireless

LIT-SWM4000-OG-EN-100205.indd

Changing Batteries

Expected life for an Alkaline battery is approximately 8 hours.

Change batteries when the battery bar in LCD display is empty, as shown below:

Antenna (replaceable)

LCD screen

On-off/mute switch

Press and hold to turn on or off. Press and release to mute or un-mute.

Set switch

Battery cover

IR port - Receives infrared beam to synchronize frequencies.

When using multiple systems, only one transmitter IR port should be exposed at a time.

Gain adjustment switch

Mute indicator - Red: mute on

TA4-F microphone input jack

Clip the transmitter to a belt until the belt is pressed

against the base of the clip.

1. With the power on, press and hold the set button until the GROUP and CHANNEL

displays begin to alternate.

2. To change the group setting, release the set button while GROUP is ashing. While

GROUP is ashing, pressing set increases the group setting by one.

3. Press power button to switch between GROUP and CHANNEL settings.

Remember to press power and set button to conrm when the setting is completed.

Press the power and set buttons simultaneously to lock or unlock the transmitter settings.

When locked, the current settings cannot be changed manually.

Indicates charge remaining in transmitter batteries.

Programming the Beltpack Transmitter

Controls

SW40-T

Beltpack Transmitter

Wearing the Beltpack Transmitter