Installation Guide

Step 3 : attach the left side (D) and the right side (E)

to the back (A) and front part (F) by using the bolt L

(H1).

ighten with the Allen Key (H8) as shown on the picture(I).

Before beginning the assembly of the product, make sure all parts are present.

Compare the parts with the package contents list and hardware contents list.

If any parts are missing or damaged, do not attempt to assemble the product.

Tool required for assembly (included):

Allen Key

PREP

ARA

TION

Step 4 : tighten back (A) with Allen Screw S (H4) and

Allen

screw L

(H3) as shown on picture. T

ighten with the

Allen

key (H8). Put the seat (G) to the bench.

Step 2 : attach support (B) to long bar (C).Then

attach it to the back (A) as shown on the picture .

Using screw S (H6) and tighten with the screwdriver

Step 1 : attach support (B) to front (F) and long

bar (C).Using screw S (H6) and tighten with the

screwdriver as shown on the picture.

H3 + H4