Owner Manual

Assembly Instruction

CAUTION:

Read instruction carefully and turn electricity off at main circuit breaker panel

before beginning installation.

ITEM#:DSN1300A

Product Dimensions: 16.5"x 16.5" x 26"H

Care and Cleaning

To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean

water, never a solvent) to wipe the surface of the fixture.

To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit

breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean

cloth(use clean water, never a solvent) to wipe the interior surface of the fixture

Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth

to dust or wipe carefully.

Estimated Assembly Time:30 minutes

Part List and Hardware List

Mounting Screw

Bulb

Wire Nut

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

Mounting Plate

Canopy

Hanging Loop

Canopy Nut

Closable link

Shade

Fixture Loop

Chain

Socket Assembly

1/3

PAGE 1
Assembly Instruction CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel before beginning installation. ITEM#:DSN1300A Product Dimensions: 16.5"x 16.5" x 26"H Care and Cleaning To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never a solvent) to wipe the surface of the fixture.
PAGE 2
Installation Step 1 Unpack all parts from cartons carefully. Attach the Closable Link(G1) onto the Hanging Loop(E and H) Put the wire in the ring(like number 3/7/11 and so on) every three rings as right picture. Put the wire through the nut(F)and loop(E)and canopy(D)and plate(A) Place the Canopy(D)onto the Hanging Loop(E) Place the tube of Mounting Plate(A)into the theaded portion of the Hanging Loop(E) and fix it by turing the Canopy Nut(F) clockwise till tight.
PAGE 3
Step 4 Install the Mounting Plate(A) to the junction box with Mounting Screw (C) Attach the Canopy(D) to the junction box and fix it by turning the Canopy Nut(F) clockwise Insert the bulbs (K) into the Sockets PLEASE USE ON/OFF TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT THERE IS LED 4-WATT BULB IN THE BOX Step 5 Consult a qualified electrician to ensure correct branch circuit conductor.