User Guide

Filter Replacement Reminder
When the cumulative use time of the filter reaches 1,000 hours, the
Fan icon turns red.
NOTE: The filter replacement timing is based on usage. 1,000 hours
would equate to about 90 days with daily usage of 11 hours. 24
hours continuous usage would require a filter change earlier.
6
ENGLISH
To Adjust Settings
You can adjust settings directly on the unit or by using the Safety 1st
Connected app.
Short press the Power button to power on/off.
Long press for 5 seconds to enter pairing mode .
Long press for 10 seconds restore to factory settings, makes
a sound, power icon blinks 3 times.
NOTE: Memory will recall your last settings when next powered on.
Press Fan Speed button to cycle through low, medium,
high and off.
Press Nightlight button to set brightness to low, medium,
high and off.
Press Soothing Sounds /White Noise button to turn it on.
Press again to cycle through volume volume level 1, 2, 3, 4, 5,
then off.
Long press to cycle through available sounds and to turn off
Short press to adjust the volume.
Sleep Mode keeps indicator lights off unless they are pressed.
Short press to enable/disable sleep mode.
Long press to enable/disable child lock. Any button pressed will
be locked when enabled.
Press Timer button to cycle through settings:
Naptime, Bedtime and off.
Left LED - Naptime timer (2 hours*)
Right LED - Bedtime timer (12 hours*)
Both LEDs - Custom timer (in-app only)
*Configurable in-app.