User`s manual

FP5/GP5 User’s Manual 101
Appendix A-3
CE Conformance
EU Manufacturer’s Declaration
Products
Static inverter, series FP5/GP5
Scope
Saftronics inverters are components (BDM*
, defined by IEC 22G/21CDV) designed
exclusively for installation in machines or systems (end products) by qualified re-users
(e.g. mechanical engineering manufacturers).
Responsibility
As a component manufacturer we are responsible for the provision of installation instruc-
tions. These can be found in the installation guidelines publication EZZ006908.
Our products have been tested by authorized bodies pursuant to the requirements of the
standards listed below. The products conform to these standards, subject to due and proper
observation of the installation instructions provided in section 10 of this manual:
Immunity — EMC resistance pursuant to EN50082-2, Part 2:
EN 61000-4-2 Resistance to static discharge
EN 61000-4-4 Resistance to high-speed transients and bursts
EN 61000-4-8 Testing of resistance to magnetic fields with power systems frequencies
ENV 50140 Resistance to high-frequency magnetic fields
ENV 50141 Resistance to conducted interference
Emissions — EMC interference emissions pursuant to EN50081-2, Part 2:
EN 55011 Class A or B limit curve under the conditions described in the operating
instructions in the installation guidelines, EZZ006908.
Always observe all the safety instructions provided in this product documentation!
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor