User`s manual

FP5/GP5 User’s Manual 11
1.3 PRELIMINARY INSPECTION
Receiving
After unpacking the FP5/GP5:
·Verify that the part numbers on the drive nameplate match the num-
bers on your purchase order or packing slip.
·Check the unit for physical damage which may have occurred during
shipping. If any part of the drive is missing or damaged, notify the
carrier and your Saftronics representative immediately.
·Verify that all internal hardware (i.e. components, screws, etc.) is
seated properly and fastened securely.
·If the drive will be stored after receiving, place it in its original pack-
aging and store according to temperature specifications on page 8.
Checking the Nameplate
MODEL :
INPUT :
OUTPUT :
CIMR-P5U43P7 SPEC :
AC 3PH
AC 3PH 0-460V 6.1kVA 8.5A
380-440V 50Hz
380-460V 60Hz
LOT NO : MASS : 4.5 kg
43P71F_
SER NO :
Mg
Inverter
Input Spec.
Output Spec.
Lot No.
Serial No.
Inverter
Mass
Model
Spec.
UL FILE NO :UL File No.
Figure 1 Nameplate Example of American Model P5U43P7
10.2A
E131457
Specifications
A: Japanese specifications
E: European specifications
U: American specifications
CIMR - P5 U 4 3P7 1 F
Inverter
FP5/GP5 Series
Revision symbol
Model Designation
3P7 to 300
See Specifications, pp 7-10
Voltage Class
2: 3-phase, 230V
4: 3-phase, 460V
Enclosure
0: Open chassis
1: NEMA 1 (IP20)
Figure 2 Nameplate Description
Chapter 1 - Receiving & Installation
Preliminary Inspection
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor