User`s manual

FP5/GP5 User’s Manual 17

Clearances

When mounting the FP5/GP5, allow sufficient clearances for effec-

tive cooling as shown below:

Notes:

1)The required clearances at the top, bottom, and both sides of the inverter are the same

for both open chassis and NEMA 1 enclosures.

2)For inverter models 25HP and less (230V & 460V), remove the top and bottom covers

to convert NEMA 1 units to open chassis

3)Allowable intake air temperature:

Open chassis: 14°F to 113°F (-10°C to +45°C)

NEMA 1: 14°F to 104°F (-10°C to 40°C)

4)When mounting units in an enclosure, install a fan or other cooling device to limit the

air temperature within the inverter to below 113°F (45°C).

Front View Side View

Figure 7 FP5/GP5 Dimension Diagram

1.97in (50mm)

1.18in (30mm)

4.72in (120mm)

Air

Front View Side View

Figure 8 FP5/GP5 Clearances

Chapter 1 - Receiving & Installation

Mounting

efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor