User`s manual

32 FP5/GP5 User’s Manual
Operation Checkpoints:
·Motor rotates smoothly.
·Motor rotates in the correct direction.
·Motor has no abnormal vibration and is not noisy.
·Acceleration and deceleration are smooth.
·Unit is not overloaded.
·Status indicator LEDs and digital operator display are correct.
Basic Operation
The inverter will operate after receiving a frequency reference. There are
two operation modes for the FP5/GP5:
·Run command from the digital operator.
·Run command from the control circuit terminals.
Operation by Digital Operator
The diagram below shows a typical operation pattern using the digital
operator. Pressing the LOCAL/REMOTE key once while the inverter is
stopped places the inverter in the LOCAL mode. The digital operator,
JVOP-130P, can then be used to start and stop and change the reference.
Figure 15 Operation Sequence by Digital Operator
Reverse
60Hz
Forward
15Hz
Stop
1
2 3
4
5 6
Reverse Run
ON
Power
Frequency Setting
Forward Run
Frequency Reference Change
Chapter 2 - Operation
Trial Operation
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor