Operation Manual

20
SLOW COOK
The SLOW COOK setting has cooking
profiles designed for long cook times at low
temperatures. It is ideal for breaking down
tough cuts of meat and developing deep
flavours.
1. Turn the START/SELECT dial until the
indicator reaches the SLOW COOK setting.
Press the START/SELECT dial
to confirm.
2. Turn the START/SELECT dial until the
indicator on the right hand side of the LCD
reaches the desired setting.
3. The top figure on the LCD screen indicates
the preset temperature for the selected
setting. Turn the TEMPERATURE/
PRESSURE dial to the left to reduce the
temperature or to the right to increase
temperature. Temperature can be adjusted
to one of two preset temperatures; ‘LO’
or ‘HI’.
4. The bottom figure on the LCD screen
indicates the preset cooking time for the
selected setting. Turn the TIME dial to the
left to reduce the cooking time or to the
right to increase the cooking time. Time can
be adjusted between 2 and 12 hours.
5. ‘KEEP WARM’ indicates the KEEP WARM
function will automatically switch on after
the SLOW COOK cycle. Press the KEEP
WARM button on the control panel to
select or deselect the function.
6. Place food into the removable cooking bowl.
Ensure there is at least 1L of combined food
and liquid in the bowl.
MINIMUM OF 1L
OF COMBINED
FOOD & LIQUID
7. Close the lid but do not lock.
8. Remove the pressure release valve from
the lid.
9. Press the START/SELECT dial to
commence cooking. The STOP/CANCEL
button backlight will illuminate red and the
LCD screen will illuminate orange.
10. The timer will be displayed and
automatically begin to count down. The
time can be adjusted during the slow cook
cycle by turning the TIME dial. The cycle
can be paused at any time by pressing the
STOP/CANCEL button. To end the cycle
press and hold STOP/CANCEL for
2 seconds.
11. At the end of the slow cook cycle, the cooker
will automatically switch to the KEEP
WARM function. The LCD screen will
display ‘KEEP WARM’ and the timer will
start counting up to a maximum of 2 hours.
The keep warm cycle can be paused at
any time by pressing the STOP/CANCEL
button.
12. If KEEP WARM has not been selected, the
cooker alert will sound, the STOP/CANCEL
button backlight will go out and the LCD
screen will illuminate blue.
13. After 5 minutes of inactivity, standby
mode will be activated. The button
backlight will go out and the LCD will no
longer illuminate.