Installation guide

Annex A - Troubleshooting
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Page A-2 Sagem Communication document. Reproduction and disclosure prohibited
A.1 Checking the attribution of an IP address
A.1.1 In Windows
In Windows 98 and Me
¾ Click button Start, select Execute, enter winipcfg and then click OK; the dedicated
application appears.
¾ Check that the entry IP Address contains a value other than 0.0.0.0 (192.168.1.10 for
example, for interface ETH).
In Windows XP, 2000
¾ Click button Start, select Execute, enter cmd and then click OK; the command prompt
screen appears. Enter ipconfig and then confirm by pressing Enter.
¾ Check that the entry IP Address contains a value other than 0.0.0.0 (192.168.1.10 for
example, for interface ETH).
If no address is displayed on the screen, enter ipconfig /release
followed by ipconfig /renew.
A.1.2 On a Mac (for example MacOS X)
¾ Click Apple, in the menu bar.
¾ Select System Preferences, and then click the Network icon.
¾ Check that the entry IP Address contains a value other than 0.0.0.0 (192.168.1.10 for
example, for interface ETH).
¾ Check that the entry IP Address contains a value other than 0.0.0.0 (192.168.1.10 for
example, for interface ETH).
If no address is displayed on screen, click button Apply for the
computer to send a DHCP query to the router.