Installation guide

Annex A - Troubleshooting
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Sagem Communication document. Reproduction and disclosure prohibited Page A-3
All the troubleshooting procedures described below are undertaken in
Windows® XP. These procedures in other Windows operating systems® (98, ME
and 2000) can be slightly different.
To help locate the fault, the user has the following sources:
¾ States of Front Face LEDs,
¾ Data accessible by the configurator by "DSL Router" onboard HTTP of your router:
• supervision of the router,
• "Diagnostics" tool.
A.2 Front Face LEDs
When the router is switched on, the "@" LED (Internet) lights in
green and gets off then the
" " LED (PWR) lights in green.
Status Colour @
Green Power
present
Synchronised
ADSL line
USB or ETH line
active
Public Address
available
On steady
Red Failure
detected at
the tim of
starting
xx
Unconnected line
or
Public Address
unavailable
Blinking Green x x At LAN traffic rate At WAN traffic rate
Blinking
quickly
Green
X
ADSL
synchronisation
training
Blinking
slowly
Green
x
Line not
connected
xx
Off
_
Power
not present x
USB or ETH line
inactive
Power
not present
or "Bridge" mode