Installation guide

Annex A - Troubleshooting
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Sagem Communication document. Reproduction and disclosure prohibited Page A-7
A.5 Interpreting the LEDs
A.5.1 The "ADSL" LED blinks slowly
¾ Check the connection of your ADSL filters. Each telephone socket of your installation which
is used must be equipped with an ADSL filter.
¾ Check that the RJ11 type line cord delivered with your router is connected to one of your
sockets. It is recommended that no telephone extension is used.
¾ Finally, check with your ISP on the availability of the ADSL service on your telephone line.
A.5.2 All LEDs are off
¾ Check that the type of power available in your premises is compatible with the mains
voltage required for powering your router.
¾ Check that the delivered power cord is properly connected at one end to the mains power
network.
¾ Check that the power connector is inserted correctly in the corresponding connector (power)
of the router.