Installation guide

Annex G - Connector Technology
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Sagem Communication document. Reproduction and disclosure prohibited Page G-3
G.3 Pinouts of the "ETH" connector
The Ethernet interface is connected to the equipment using a RJ45
fixed connector (8 contacts).
12345678
Contact N° Signal Meaning
1 TXD+ (+) Emission to terminal
2 TXD- (-) Emission to terminal
3 RXD+ (+) Reception of terminal
4 NC Not connected
5 NC Not connected
6 RXD- (-) Reception of terminal
7 NC Not connected
8 NC Not connected
The Ethernet port is self-detecting. You can use either straight or crossed
cables. An emission or reception signal is detected automatically.