Installation guide

2 - Description and connection of your router
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Sagem Communication document. Reproduction and disclosure prohibited Page 2-3
2.1.1 "Connectors" side view
Marking Meaning
LINE
RJ11 connector - 6 pts. This grey connector is used for the connection to an
ADSL line (WAN interface).
USB
Type B USB female connector. This blue connector is used for connection to
a computer (USB interface).
ETH
RJ45 connector - 8 pts (10/100BASE-T Ethernet Interface). This yellow
connector is is used for connection to a computer (10/100BASE-T ETH
interface).
REG
This button allows the router to be reset to the factory configuration
(see § A.7).
Note: It is set back relative to the other elements to prevent an accidental
loss of configuration.
On/Off switch.
PWR
Miniature jack fixed connector.
This connector enables the router to be supplied with direct current from a
mains adapter unit.