Installation guide

5 - Information / Configuration
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Page 5-24 Sagem Communication document. Reproduction and disclosure prohibited
Field Action
VPI/VCI
Displays the VPI/VCI specific to the "PPPoA" connection
Connection Type
Displays the "PPPoA" protocol
Service Name
Displays the name of the service: pppoa_0_35_1
Service Category
Displays the type of service adapted to the traffic required.
IP Address
Indicates that the IP address is allocated automatically:
Automaticaly Assigned
Service State
Displays the status of the service: Enabled
NAT
Displays the status of the NAT: Enabled
Firewall
Displays the status of the firewall: Enabled
IGMP Multicast
Displays the status of the IGMP function: Disabled
• click on the button to save the WAN interface configuration.