Installation guide

5 - Information / Configuration
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Sagem Communication document. Reproduction and disclosure prohibited Page 5-29
MAC Encapsulation Routing (MER)
Field Action Default
Obtain an IP address
automatically
Check the box to obtain an IP address
automatically by your router's DHCP server.
Note: This box is not checked if a VCC has
been created.
Box
checked
Use the following IP
address:
If you check this box, you must enter a static
IP address and the dedicated subnet mask.
_
WAN IP Address
4
Enter the static IP address.
0.0.0.0
WAN Subnet Mask:
4
Enter a subnet mask.
0.0.0.0
Obtain default gateway
automatically
Check the box to obtain the gateway IP
address automatically by your router's DHCP
server.
Box
checked
Use the following default
gateway:
If you check this box, you must enter the
default gateway address.
_
Use IP Address
5
Enter the default gateway address.
_
Use WAN Interface:
5
Select the WAN interface of your choice from
the scroll down list (optional)
_
4
This field only appears when the "Use the following IP address:" field is activated (box checked).
5
This field only appears when the "Use the following default gateway:" field is activated (box checked).