Installation guide

5 - Information / Configuration
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Page 5-32 Sagem Communication document. Reproduction and disclosure prohibited
• Click on the Next button to continue configuring the remote network (WAN) in MER mode.
Field Action
VPI/VCI
Displays the VPI/VCI specific to the "MER" connection
Connection Type
Displays the "MER" protocol
Service Name
Displays the name of the service: mer_0_35_1
Service Category
Displays the type of service adapted to the traffic required.
IP Address
Indicates that the IP address is allocated automatically:
Automatically Assigned
Service State
Displays the status of the service: Enabled
NAT
Displays the status of the NAT: Disabled
Firewall
Displays the status of the firewall: Disabled
IGMP Multicast
Displays the status of the IGMP function: Disabled