Installation guide

5 - Information / Configuration
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Page 5-40 Sagem Communication document. Reproduction and disclosure prohibited
5.8.3 Security
This menu contains 2 sub-menus:
• Outgoing (cf. § 5.8.3.1),
• Incoming (cf. § 5.8.3.2).
5.8.3.1 Outgoing
Object: This menu is used to create outgoing IP filters to refuse data from the LAN to the WAN
and list the existing outgoing IP filters.
By default, all the outgoing data is accepted.
• Select the Outgoing sub-menu in the Security menu in the Advanced Setup section to
display the following screen:
Field Meaning
Filter Name
Name of the filter.
Protocol
Transport protocol.
Source Address / Mask
Source IP address / Subnet mask.
Source Port
Source port
Dest. Address / Mask
Destination IP address / Subnet mask.
Dest. Port
Destination port.