Installation guide

5 - Information / Configuration
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Sagem Communication document. Reproduction and disclosure prohibited Page 5-41
Add
• Click on the Add button to display the following screen:
Field Action
Filter Name
Enter a representative name for the filter.
Protocol
Select the dedicated protocol from the scroll down list
(TCP/UDP, TCP, UDP, ICMP).
Source IP Address
Enter the Source IP address (LAN).
Source Subnet Mask
Subnet mask.
Source Port
(port or port:port)
Enter a "Source" port (LAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.
Dest. IP Address
Enter the Destination IP address (WAN).
Dest. Subnet Mask
Subnet mask.
Dest. Port
(port or port:port)
Enter a "destination" port (WAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.