User manual

11
RTI90-320 T2 HD UK
Remote control
Batteries
The remote control needs two batteries (AAA) to operate. The drawing in the battery compartment
indicates how to install them. The batteries provided are not rechargeable.
Key(s) Description
1
Put the recorder in standby mode/Wake up the
recorder from standby mode.
2 Access channels and various on-screen options
3 Display the electronic programme guide (EPG)
4 Turn the sound off/on
5 Increase or decrease the audio volume
6 Access menus
7 Move in a page, a menu…
8 Display the channel list, confirm a selection
9 Go back to the previous channel, screen or mode
10 Select subtitles
11
This key is by default deactivated. Becomes active
when Audio description is activated in your User
Preferences, and allows then to set Audio
description on the current programme (see Setting
your language options, page 31).
12 Display programme information and options
13 Change channel
14 Video resizing (if TV set connected via HDMI).
15
On-screen options (MHEG, Teletext pages and
menu)
16 Access the recording list
17 Exit a screen, a mode
18 Display Teletext pages when available
19 Switch from TV mode to Radio mode
20 Skip backward / Rewind / Fast forward / Skip forward
21 Stop / Play / Pause
22
Launch immediate recording, Schedule a recording
from the electronic programme guide (EPG)
Undocumented keys are not used on this product.
LU 253311796A RTI90-320 T2 HD UK.book Page 11 Jeudi, 8. avril 2010 8:06 08