User manual

13
RTI90-320 T2 HD UK
Connection to the antenna
1. Plug the antenna cable (not supplied) into the ANTENNA IN input connector on your recorder.
2. You can connect the RF output connector of your recorder to the antenna input of the television set or
VCR/DVD recorder (cable not supplied).
Connection to the TV set
Connection to a High-Definition television set using a HDMI lead
1. To take advantage of High Definition picture quality, you must connect the HDMI connector of your
recorder to the HDMI connector on your television set (cable supplied).
2. To connect other devices to the recorder (VCR, home theatre cinema...), refer to the following pages.
3. Connect the power adaptor to the power cable. Then, connect the power cable into the 12V connector
on the recorder.
4. Plug the power cord into the wall socket.
LU 253311796A RTI90-320 T2 HD UK.book Page 13 Jeudi, 8. avril 2010 8:06 08