User manual

16
High Definition Digital Television Recorder
5. First installation
Once the recorder is physically connected, you need to go through the setup procedure to get your
FREEVIEW channels.
1. Switch on your TV.
2. Press the Standby button on your remote control to wake the recorder up from standby mode.
3. The first installation screen should appear.
Language Selection
4. Select your language with the or key.
Press to continue.
Country Selection
5. Select your country with the or key.
Press to continue.
Video Settings
6. Select the settings better suited to your needs.
Use the up and down keys to highlight a setting, use
the left and right arrows to select a value.
• HDMI Output: If your TV set is connected to the
recorder with an HDMI cable, select YES. If you
have a standard TV set, select NO.
•TV Format: select the display mode for your TV:
16/9 (widescreen TV), 4/3 (Traditional TV) or Auto
(programme format will be respected - 16:9 or
4:3).
• TV SCART: select the video standard (RGB,
CVBS) for the TV output.
Press to continue.
LU 253311796A RTI90-320 T2 HD UK.book Page 16 Jeudi, 8. avril 2010 8:06 08