User manual

24
High Definition Digital Television Recorder
7. Video Recordings
The recording capacity of your recorder depends on the selected programme. On average, one hour of
recording requires from 1 GB (SD programme) to 2.5 GB (HD programme) of hard disk space.
You can simultaneously:
record a programme and watch another programme,
record 2 programmes and watch any of them.
In the same way, you can simultaneously:
watch a programme in deferred mode while recording another programme,
watch a recorded programme and record one or 2 programmes.
Please note if MHEG services are available on the programme you are recording, they will be discarded.
Immediate recording (Live or Deferred programme)
To record a live programme, select the desired channel and
press .
The name of the channel channel being recorded is displayed on
the screen.
The recorder will by default record the programme until its announced end time.
You can then change channel without the recording being affected.
To stop a recording, press the key.
In the same way, if you decide to record a programme that you have been watching for a certain time (1 to
2 hours maximum), enter the deferred mode using , , and , then press when
you want to start recording.
Note
You can then put the recorder in standby: the recording will stop automatically
at the end of the recording time.
When recording in deferred mode, the recorder can add a few seconds of
video at the beginning.
Once a recording is launched, you can no longer rewind before the start time.
LU 253311796A RTI90-320 T2 HD UK.book Page 24 Jeudi, 8. avril 2010 8:06 08