User manual

32
High Definition Digital Television Recorder
Setting your User Preferences
In USER SETTINGS, select USER PREFERENCES.
Display preferences
• Banner time-out: You can set how long you want
the zapping and information banners to stay
onscreen.
• Volume bar time-out: You can set how long you
want the volume bar to stay onscreen when you
turn the volume up, down, or mute it.
• User Country: Initially defined during the first
installation, it is used to give you access to
programmes and service available in your
geographical location. To change the country, you will need to reset the default settings and
reconfigure your recorder (see Resetting the recorder, page 37). Some services or channels may
become unavailable.
• Network monitoring: By activating this feature, you will be automatically informed when any new
channel or service become available.
Recording preferences
By default, the recorder records programmes based on their announced time. This recording mode is
identified as PROGRAMME type.
You can programme recording margins which will be automatically added to the recordings carried out via
the electronic programme guide. You can thus set the recorder so that it starts to record a programme
before its announced start time, and stops after its announced end time. To activate this feature, just set
the recording type to TIMER, and select the desired starting and ending times (0,1,2,5, 10 or 15 minutes).
Sleep Timer
You can set the recorder to automatically switch to standby mode at a specific time. If you activate this
feature, set the desired SLEEP TIME in 24H format.
Note
In TIMER mode, the series recording function is not available.
LU 253311796A RTI90-320 T2 HD UK.book Page 32 Jeudi, 8. avril 2010 8:06 08