User manual

36
High Definition Digital Television Recorder
Picture settings
In RECEIVER SETTINGS, select VIDEO SETTINGS.
Check the manuals of your video equipment to know what settings you need.
• HDMI Output: If your HD TV set is connected to the
recorder with an HDMI cable, select YES. If you
have a standard TV set, select NO.
• HD RESOLUTION: select the output resolution for
your HD TV set (1080i, 720p or 576p).
•TV Format: select the display mode for your
standard TV set: 16/9 (widescreen TV), 4/3
(Traditional TV) or Auto (programme format will be
respected - 16:9 or 4:3).
• Video resizing: if your standard TV format is 4/3,
select the desired resizing mode: Pan & Scan or
Letterbox.
• SCART: If you connected your standard TV set to
the recorder with a Scart cable, select TV mode. If
instead, you connected a DVD recorder to the Scart
connector, select the RECORDER mode. In TV
mode, audio volume changes and onscreen messages will be sent to the TV set. In Recorder mode,
none of these operations are sent to the external recording device so that they do not affect your
recordings.
• Video Standard: select the video standard (PAL or S-Video) best suited for the TV/AUX output.
Audio settings
In RECEIVER SETTINGS, select AUDIO SETTINGS.
Check the manuals of your audio equipment to know what settings you need.
If you have connected your recorder to a home theatre
cinema via the Digital audio connector, set DIGITAL
AUDIO OUTPUT to MULTICHANNEL. Otherwise, leave
it to STEREO.
If the audio volume varies noticeably between
programmes because of the audio type broadcast
(Stereo, multichannel, etc.), adjust the volume (default
value is 0 decibel) using and .
If the sound and picture are not synchronized, adjust the
AUDIO/VIDEO DELAY setting (default value is 0
millisecond) using and .
These settings will apply to all programmes watched on all channels.
LU 253311796A RTI90-320 T2 HD UK.book Page 36 Jeudi, 8. avril 2010 8:06 08