User manual

37
RTI90-320 T2 HD UK
Resetting the recorder
In RECEIVER SETTINGS, select RESET FACTORY
DEFAULT.
Enter your parental code and press .
A warning message appears.
To cancel the operation, press or .
To confirm the reset, press .
Once the default settings are restored, the recorder
installation screen is displayed. You can then
reconfigure your recorder (see First installation,
page 16).
Note
If you reset the default settings, you lose the channels and settings you made.
This operation does not erase the recordings saved in the recording list.
LU 253311796A RTI90-320 T2 HD UK.book Page 37 Jeudi, 8. avril 2010 8:06 08