User manual

38
High Definition Digital Television Recorder
Information Menu
The information contained in this menu may be requested if you contact your supplier or another technical
service.
You will find here important information about the recorder, the hard disk drive and the embedded
software.
To access the recorder technical information, press
. In the main menu, select INFORMATION.
Antenna Signal Information
In INFORMATION, select ANTENNA SIGNAL
INFORMATION.
This menu lets you find out the signal level and quality of
your antenna, for the currently watched programme.
If you use an active antenna with an amplifier and if you
want the recorder to supply it with power (5V power
voltage -50mA max.), set Antenna power supply by DTR
to YES. Otherwise, set it to NO.
Recorder Information
In INFORMATION, select PRODUCT DATA.
This menu provides information on the recorder
software and hardware.
Hard disk drive Information
In INFORMATION, select HARD DISK.
This menu provides information on the hard disk.
LU 253311796A RTI90-320 T2 HD UK.book Page 38 Jeudi, 8. avril 2010 8:06 08