Instructions / Assembly

Mounting
Screws
Mounting
Screws
L-Slots
Mounting
Bracket
Mounting
Bracket
Washers
Washers
5
Hanging Your Fan
Figure 8
Figure 9
7. There are 4 housing mounting screws
preinstalled on the periphery of the mounting
bracket. Remove one pair of the screws and
washers which match the round holes of
the motor housing opposite each other, and
loosen the remaining 2 screws and washers
that are also opposite one another. Make sure
the washer is pushed toward the screw head
of each loosened screw (Figure 8).
8. Attach the motor housing to the mounting
bracket by aligning the 2 loosened screws
preinstalled on the mounting bracket into the
2 L-slots of the motor housing. Then turn the
housing clockwise so that the screws more
towards the end of the L-slots. The housing
should now sit securely on the screws. Then
insert the two housing mounting screws
preinstalled to secure the motor housing
(Figure 9).
NOTE: Make sure the washers are in between
the housing and the screw heads.
80009 ∙ 06/23/11 ∙ PCI