User Manual

Problem
The dishesare
not drying
Wrong program has
been selected.
With a short program, the
washing temperature is lower,
decreasing cleaning performance.
Choose a program with a long
washing time.
Use of cutlery with a
low-quality coating.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.
Error signals
Signals
Meanings
Possible Causes
Longer inlet time.
Not reaching required
temperature
Heating tube or thermistor anomaly,
it should be repaired by a qualified worker.
A flow meter, drain valve, or pump failure,
it should be repaired by a qualified worker.
Possible Causes What To Do
When some malfunctions come on, the appliance will show a signal to warn you:
Touch button adhesion Water or other material in the key area
causes it or it should be repaired by a
qualified worker.
Communication anomaly
It should be repaired by a qualified worker.
Overflow. Some element of dishwasher leaks .
WANING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
34
The Extra Drying light
flicker fleetly
The ECO and Extra Drying
light flicker fleetly
The Intensive
light flicker fleetly
The Rapid and Extra Drying
light flicker fleetly
The Rapid, Intensive
and Extra Drying
light flicker fleetly
The Rapid, Intensive,
ECO and Extra Drying
light keep lighting
It should be added more water until listening
a quick beep. Then press Start/Pause button
to make sure machine work properly.
Water tank doesn't get
enough water within
3 minutes