Operation Manual

Selecting another track
1 During playback, keep pressing »SKIP
4
I « or »I
3
SKIP« until the
number of the track you want to hear appears in the display.
– Playback of the selected track starts automatically.
Searching for a passage within a track
1 During playback, press »SKIP
4
I « or »I
3
SKIP« and hold it
down until you find the passage you want to hear.
– If »SKIP
4
I « or »I
3
SKIP« are released, playback starts.
Note:
During the search the volume is reduced.
Calling up the Repeat function
The repeat functions enable you to repeat a single track or the whole CD.
1 To repeat a track press »REPEAT« once.
– The »
REPEAT
•
« LED flashes, the current track is repeated con-
stantly.
2 To repeat all tracks on the CD press »REPEAT« again.
– The »
REPEAT
•
« LED glows. The entire CD is repeated constantly.
3 To cancel this function, press »REPEAT« again.
Playing back tracks in random order
1 Press to select the »CD MODE« function.
2 Press »PLAY/PAUSE
ı
II« to start playback.
– The »
RANDOM
•
« LED glows.
– The tracks on the CD are played back in random order.
3 To cancel this function, press »CD MODE«.
– The »
RANDOM
•
« LED goes out.
– The tracks are played back in numerical order.
Creating a track memory
This function enables you to store up to 20 tracks on the current CD in a
certain order and then play them back in that sequence. The same track may
be stored more than once.
1 Place a CD in the CD compartment.
2 When the CD is in the STOP position, select the function with
»MEMORY«.
– Display: »P01«, the »
PROG.
•
« LED flashes.
3 Select the track with »SKIP
4
I « or »I
3
SKIP«.
– Display: e.g. »03« (for the first selected track) and the »
PROG.
•
«
LEDs flash.
OPERATION
___________________________________________
02 CD Clock Discalo CCD 6300,GB 31.03.2003 12:52 Uhr Seite 30