Operation Manual

ENGLISH
Alarm with radio station
1 Set the sliding switch »BUZZER MUSIC« to »MUSIC«.
2 Set the sliding switch »e1 OFF ON ADJ« or »e2 OFF ON ADJ«
(left side of the device) to »ON«.
– Display: The »e1
•
« or »e2
•
« LED glows.
3 Select the frequency band (FM or MW) with »CD MW FM FM
STEREO« (right side of the device).
4 Set the desired radio station with »
TUNING
« (right side of the device).
5 Set the desired alarm volume with » VOLUME
|« (right side of
the device).
6 Press »ON/OFF« to switch the device to standby mode.
– The »
ON
•
« LED goes out.
– The device switches the radio on at the set times (alarm duration 90
minutes).
Alarm with CD
1 Set the sliding switch »BUZZER MUSIC« to »MUSIC«.
2 Set the sliding switch »e1 OFF ON ADJ« or »e2 OFF ON ADJ«
(left side of the device) to »ON«.
– Display: The »e1
•
« or »e2
•
« LED glows.
3 Set the sliding switch »CD MW FM FM STEREO« (right side of the
device) to »CD«.
4 Insert a CD into the CD compartment and set the desired alarm volume
with » VOLUME |« (right side of the device).
5 Press »ON/OFF« to switch the device to standby mode.
– The »
ON
•
« LED goes out.
– The device switches CD playback on at the set times (alarm duration
90 minutes).
Alarm with track memory
1 Repeat steps 1 to 4 of the previous section.
2 Start playback with »PLAY/PAUSE
ı
II« and then press »
STOP
7
«.
3 Press »ON/OFF« to switch the device to standby mode.
– The »
ON
•
« LED goes out.
– The device switches CD playback with the stored track memory on at
the set times (alarm duration 90 minutes).
OPERATION
___________________________________________
02 CD Clock Discalo CCD 6300,GB 31.03.2003 12:52 Uhr Seite 33