Installation Guide Sheet

SALSBURY INDUSTRIES
18300 Central Avenue, Carson, CA 90746-4008
Phone: [phone] Int’l Phone: [phone]
Fax: [phone] Int’l Fax: [phone]
www.mailboxes.com [e-mail]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability
Copyright © 2020 Salsbury Industries. All rights reserved. --- Part No. 1055282, Rev. 07
Page 9 of 10
PEDESTAL TO CBU INSTALLATION
ALL CBU TYPES
1.
OPEN MASTER LOADING DOORS.
2.
REMOVE LEFT AND RIGHT SIDE 1055344
FLOATING SHELVES, EXPOSING
MOUNTING HOLES.
3.
PLACE UNIT ON PEDESTAL.
4.
FROM UNDERNEATH UNIT, INSERT FOUR
(4) 3/8-16 x 1.25 STAINLESS STEEL
CARRIAGE BOLTS UPWARD.
5.
FROM INSIDE LOWEST COMPARTMENTS,
ADD FOUR (4) 3/8” X .688 OD STAINLESS
STEEL LOCK WASHERS AND TIGHTEN
FOUR (4) 3/8-16 STAINLESS STEEL
PASSIVATED HEX NUTS. TORQUE TO 22
FOOT-POUNDS.
6.
REPLACE LEFT AND RIGHT SIDE 1055344
FLOATING SHELVES.
REQUIRED TOOLS
9/16” SOCKET WRENCH
PART # DESCRIPTION
3632SS12 3/8-16 STAINLESS STEEL PASSIV-
ATED HEX NUT
74437 3/8-16 X 1.25 STAINLESS STEEL
CARRIAGE BOLT
1055344 FLOATING SHELF
1055280-2 PEDESTAL FOR TYPE I, II, V
1055280-1 PEDESTAL FOR TYPE III, IV, VI
903168SS12 3/8-16 X .688 OD STAINLESS
STEEL LOCK WASHER