Owner manual

4
TM
1
3
5
7
4
6
2
Weld this bar to
truck frame
Weld these
rods together
at final assembly.
Parallel Linkage, Spinner Frame & Bar
Installation Drawings (cont.)
Bill of Materials
1 1 Spinner Frame Assy. 3001471 3006679
2 1 Spinner Shield 924F0015 3006659
3 1 Spinner disk Assy. 3001472 3001472
4 2 Linkage Rods, Welded 924F0012 924F0012
5 1 Hinge Rod 924F0018 3006646
6 1 Spinner Lug 924F0013 3006645
7 1 Bar 924F0014 924F0014
item qty. description carbon stainless
92420A & 92420SSA
Direct Drive Under Tailgate Spreaders
Using hose number 3008112, insert one end into
the bottom of the ball valve assembly. Insert the
other end into the LH port (when looking from rear)
of the hydraulic motor.
92430A & 92430SSA
5:1 Gearbox Under Tailgate Spreaders
Using hose number 3008113, insert one end into
the bottom of the ball valve assembly. Insert the
other end into the LH port (when looking from rear)
of the hydraulic motor.
Attach inlet
ow here
Insert one
into bottom
of ball valve
Insert other
into port on
hydraulic
end of hose
end of hose
motor
3008113
3008112
Attach inlet
ow here
Insert one
into bottom
of ball valve
Insert other end
of hose into port
on hydraulic motor
end of hose