Instructions / Assembly

SCREW 3/8-16 x 2.0

3018923

SPINNER

PROTECTOR

WASHER FLAT 3/8

NUT 3/8-16

3015926

HINGE LID

SCREW 3/8-16 X 1.0

WASHER FLAT 3/8

NUT NYLOCK 3/8-16

SHIELD #3015707

8. Attach spinner protector #3018923 to spreader frame as

shown in Fig.8.

7. Attach shield #3015707 to trough bracket as shown in

Fig.7

Fig. 8

Fig. 10

9. Attach spinner disk to gear motor shaft as shown in Fig.9.

Secure disk on shaft using clevis pin and cotter pin.

Fig. 7

3019561

CLEVIS PIN 1420014

COTTER PIN FPC007800075

Fig. 9

10. Install lid #3015926 on to hopper. Place lid on hopper.

Bend hinges outward from center of the hopper. Slide

hinges openings on round protrusions of the lid. Repeat

this operation on opposite side of the hopper. Secure lid on

hopper using lynch pin.

To open lid from ether side of the hopper disengage lynch

pin, bend both hinges outwards and open lid.