Specifications

ER-5200/ER-5200M series Electronic Cash Register AU Program Mode Programming • 91
Program Mode Programming
Default Programming
• All keyboard PLUs are Taxable, Preset and Override, without entry limits by default
status programming of "400000000".
• All system options are set to 0 in default programming, unless otherwise noted. Change
only the options that will deviate from default programming. There is no need to re-enter an
option status of 0, since 0 is its original setting.
• All programming (unless otherwise noted) is done with the control lock in the PGM-Mode.
Each section details a specific area of register programming.
• The Default program is set to 10.000% VAT on Tax 1 and the description is set to GST
already.
Descriptor Programming Methods
Descriptors are programmable for PLUs, function keys, groups, clerks and the logo/messages. There
are two methods available to program descriptors, the Alpha Overlay and the Descriptor Code
Methods. Alpha Overlay Method is the default programming method, to switch between two
methods, please see Option #25-1 of “System Option Programming” in “Program Mode
Programming”.
This chapter describes both methods. ER-5200/40/M use Alpha Overlay Method by default and ER-
5215/M use Descriptor Code Method by default. You can select each method by System option
programming.