Specifications

ER-5200/ER-5200M series Electronic Cash Register AU Program Mode Programming • 97
Program 100 - PLU Status Programming
PLUs default to Taxable by Rate 1. i.e GST
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 1 0 0, press the SBTL key.
0 SBTL 0 1
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU on the keyboard, or
PLU
• Press the first PLU in a range of PLUs that are to receive the same setting then press the
last PLU, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU key,
or
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
• For a barcode item, scan the barcode.
4. Refer to the "PLU Status Chart" to determine the values for N1 through N9. (If an address
offers more than one option, add the values for each option and enter the sum. For example, if
you wish the PLU to be taxable by rates 1 and 3, add the values for your choices, 1 + 4, and
enter the sum "5" for address N5.) Enter the values you have selected, press the X/TIME key.
(You do not need to enter preceding zeros. For example, if you are only selecting a value
for N9, i.e. auto tare by number 1, just enter 1.)
Australian GST status is preset by default.
N3 N2 N1 N4 N5 N6 N7 N8 X/TIME N9
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH