Specifications
100 • Program Mode Programming ER-5200/ER-5200M series Electronic Cash Register AU
Program 110 - PLU Auto Tare Programming
NOTE: If this program has been performed, please also see Program 1400 - Scale Tare Weight
Programming in Program Mode Programming - Miscellaneous Programming for more
detail.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 1 1 0, press the SBTL key
0 SBTL 1 1
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU on the keyboard, or
PLU
• Press the first PLU in a range of PLUs that are to receive the same setting then press the
last PLU, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU key,
or
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
• For a barcode item, scan the barcode.
4. Enter a value (1-5) to indicate the number of the preprogrammed tare weight you want to
automatically subtract when the PLU is used for scale entry (using an optional scale). Enter
0 to disable automatic tare subtraction, follow with X/TIME key.
X/TIME N
5. Program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program
CASH