Specifications

102 • Program Mode Programming ER-5200/ER-5200M series Electronic Cash Register AU
Program 200 - PLU Price/HALO Programming
NOTE: IF Price Level in the Memory Allocation is set to 2, the 2
nd
price level must be set as
well. Price of level 2 may be $0.00. Before changing price of one of the level, original
prices has to be checked. Unchanged price of its level has to be entered as well.
If a PLU is set open, the number entered will be a HALO (high amount lock out). If a PLU is set
preset, the amount entered will be a preset price. If a PLU is set with gallonage status, enter the price
per liter here. (Enter price per liter in tenths of a cent, i.e. 1299 for $1.29 9/10 per liter.)
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 2 0 0, press the SBTL key.
0 SBTL 0 2
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU on the keyboard, or
PLU
• Press the first PLU in a range of PLUs that are to receive the same setting then press the
last PLU, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in a range of PLUs that are to receive the same setting;
press the PLU key. Enter the last PLU number in the range; press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
• For a barcode item, scan the barcode.
4. If the PLU is open, enter a HALO of up to 7 digits. If the PLU is preset, enter a preset price.
Press X/TIME key.
X/TIME
1
st
Pri ce/HALO
If the PLU Price Level is 2, repeat this with level 2 price again (or enter $0.00 price).
X/TIME
2
nd
Pri ce/HALO
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH