Specifications

ER-5200/ER-5200M series Electronic Cash Register AU Program Mode Programming • 103
Program 250 - PLU Stock Amount Programming
With this program, you can add stock to the PLU sales counters for PLUs you have designated as
stock keeping PLUs. See “Program 100 - PLU Status Programming”. The stock number set here
can be the amount of stock that is being added to the current level, or optionally, it can be the new
total stock level. See option #18 in "System Option" to set this option.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 2 5 0, press the SBTL key.
0 SBTL 5 2
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU on the keyboard, or
PLU
• Press the first PLU in a range of PLUs that are to receive the same setting then press the
last PLU, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU key,
or
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
• For a barcode item, scan the barcode.
4. Enter the stock amount you wish to add (up to six digits), press the X/TIME key.
X/T IME
Stock Amount
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH