Specifications

104 • Program Mode Programming ER-5200/ER-5200M series Electronic Cash Register AU
Program 300 - PLU Description Programming
Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select ‘No’ in system
option #25 (See “System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 3 0 0, press the SBTL key.
0 SBTL 0 3
3. Select the PLU you wish to program in one of the following ways:
• Press a PLU on the keyboard, or
PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
• For a barcode item, scan the barcode.
4. If you are programming using alpha overlay;
Type up to 18
descriptor keys
X/TIME
or,
X/TIME
Enter up to 18
three
-
character codes
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH