Specifications
106 • Program Mode Programming ER-5200/ER-5200M series Electronic Cash Register AU
Program 400 - PLU Delete Programming
NOTE: To delete a PLU, all totals for the PLU must be cleared from Z reports (including Stock and
PLU reports.)
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 4 0 0, press the SBTL key.
0 SBTL 0 4
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU on the keyboard, or
PLU
• Press the first PLU in a range of PLUs that are to delete then press the last PLU, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
u
p
to 15 di
g
its
• Enter the number of the first PLU in a range of PLUs that are to delete and press the
PLU key. Enter the last PLU number in the range; press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
• For a barcode item, scan the barcode.
4. Press X/TIME key.
X/TIME
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH