Specifications

120 • Program Mode Programming ER-5200/ER-5200M series Electronic Cash Register AU
Program 80 - Function Key Descriptor Programming
Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select ‘No’ in system
option #25 (See “System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 8 0, press the SBTL key.
0 SBTL8
3. If you are programming ER-5200/ER-5200M,
Type up to 18
descriptor keys
FUNCTION
KEY
(EPROM v5.1R and earlier)
X/TIME
Type up to 18
descriptor keys
FUNCTION
KEY
(EPROM v5.2R and later)
or,
Enter up to 18
three-character codes
FUNCTION
KEY
If you are programming ER-5240/ER-5240M,
X/TIME
Type up to 18
descriptor keys
FUNCTION
KEY
or,
Enter up to 18
three-character codes
FUNCTION
KEY
If you are programming ER-5215/ER-5215M,
Enter up to 18
three-character codes
FUNCTION
KEY
4. To program additional function keys, repeat from step 3, or press the CASH key to finalize
the program.
CASH
NOTE: The MACRO (1 - 10) function keys descriptor is programmed with Programmed 711.
Please refer to Miscellaneous Programming - Macro Name Programming.