Specifications

154 • Program Mode Programming ER-5200/ER-5200M series Electronic Cash Register AU

Program 801 - Drawer Assignment & Training Clerk Programming

1. Turn the control lock to the PGM-Mode.

2. To begin the program, enter 8 0 1, press the SBTL key.

1 SBTL 0 8

3. Enter the number of the clerk you wish to program; press the X/TIME key.

X/TIME

4. Enter an option digit from the table below, press the SBTL key.

N2 SBTL N1

Address OPTION VALUE = SUM

Drawer assignment

(0: default drawer, 1: no drawer)

Train Clerk

Yes = 1

No = 0

ÚDefault values have been highlighted in bold print

5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize the

program.

CASH

NOTE: When set to ‘0’ for default drawer, will show ‘1’ on the Program Scan - Clerk Scan,

‘1’ will show ‘2’, ‘2’ will show ‘0’.