Specifications

162 • Program Mode Programming ER-5200/ER-5200M series Electronic Cash Register AU
Program 700 - Logo Description Programming
Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select ‘No’ in system
option #25 (See “System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
Programming the Receipt/Check/Endorsement Message
A preamble message of up to six lines can be printed at the top of each receipt; a postamble
message of up to six lines can be printed at the bottom of each receipt: a endorsement
message of up to ten lines can be printed when a check is endorsed on an optional slip printer.
Each line can consist of up to 32 characters.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 7 0 0, press the SBTL key.
0 SBTL 0 7
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
X X/TIME
X Message Line X Message Line
1
1
st
line of Preamble
12
6
th
line of Postamble
2
2
nd
line of Preamble
13
1
st
line of Endorsement
3
3
rd
line of Preamble
14
2
nd
line of Endorsement
4
4
th
line of Preamble
15
3
rd
line of Endorsement
5
5
th
line of Preamble
16
4
th
line of Endorsement
6
6
th
line of Preamble
17
5
th
line of Endorsement
7
1
st
line of Postamble
18
6
th
line of Endorsement
8
2
nd
line of Postamble
19
7
th
line of Endorsement
9
3
rd
line of Postamble
20
8
th
line of Endorsement
10
4
th
line of Postamble
21
9
th
line of Endorsement
11
5
th
line of Postamble
22
10
th
line of Endorsement
4. If you are programming using alpha overlay,
Type up to 32
descriptor keys
SBTL
or,
SBTL
Enter up to 32
three-character codes
5. Press the CASH key to finalize the program.
CASH