Specifications
174 • Program Mode Programming ER-5200/ER-5200M series Electronic Cash Register AU
Program Scans
Since much time and energy has been invested in the planning and programming of your ER-
5200/ER-5200M series, it is advisable to print a hard copy of the final program for future reference.
This copy should be kept in a safe place.
Program 15 - Program Scans
1. Turn the control lock to the PGM-Mode.
2. To print a program scan, enter 1 5, press the SBTL key.
5 SBTL 1
3. In this step, there are three different ways to scan program information. One is PLU, the
other is Macro, and the third is Others.
PLU PROGRAM SCAN
• To read single PLU program information, enter the number (1-1000) of the PLU and
press the same number and PLU key.
PLU
Enter the PLU#,
u
p
to 15 di
g
its
Enter the PLU#,
u
p
to 15 di
g
its
PLU
• Press a PLU key on the keyboard and press same key again.
PLU 1 PLU 1
• To read multiple PLU program information, enter the first number (1-1000) and press
PLU key. Press the last number (1-1000) and press PLU key
PLU
Enter the first PLU#,
up to 15 digits
Enter the last PLU#,
up to 15 digits
PLU
• Press a PLU key on the keyboard.
PLU 1 PLU 10
MACRO PROGRAM SCAN
• To read MACRO information, press the MACRO key to be scanned,
MACRO# MACRO#